TELESCOPIC CRANES
TELESCOPIC CRANES
CALL US ON 01727 838424
32' HYDRASCOPE
Telescoping crane system​ | For use in dry and wet conditions | Completely water-submersible with full sliding weight system | Pair with the Amphibian Remote Head for spectacular underwater shots | One trained technician dispatched with unit | Can be used on crane track | Compatible with the Raptor positioning base
Find out more below...​
IMPORTANT NOTICE
​
CHAPMAN UK CONDUCT ANNUAL CRANE TESTING ON ALL OF OUR CRANES VIA RIGGING SERVICES, IN ACCORDANCE WITH THE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998. FOR MORE INFORMATION OR TO REQUEST A TESTING CERTIFICATE FOR A SPECIFIC CRANE, PLEASE CONTACT US.
ON SET SHOTS
PRODUCT SPECIFICATION
MIN CRANE ARM UNIT WEIGHT | 521.6 KG
​
MAX CRANE ARM UNIT WEIGHT | 1,228.7 KG
​
MAX CRANE UNIT WEIGHT ARM & BASE | 1,828.7 KG
​
BALANCE RATIO | 2:1
​
VOLTAGE | 24v DC BATTERY | 110v AC TO 24v DC
​
MIN HEIGHT | 7FT
​
MIN LENGTH (RETRACTED) | 17FT 9IN
​
MAX LENGTH (EXTENDED) | 39FT 9IN
​
REAR TO FULCRUM LENGTH | 8FT 11IN
​
FLOOR TO PIVOT MIN HEIGHT | 5FT 11IN
​
FLOOR TO PIVOT MAX HEIGHT | 10FT 6IN
​
UNDERSLUNG LENS HEIGHT* | 32FT 6IN
​
OVERSLUNG LENS HEIGHT* | 36FT 6IN
​
BASE WIDTH | 4FT 10IN​
​
BASE LENGTH | 6FT 3IN
​
BASE TYPE | ULTRA CS
​
WEIGHT OF BASE | 600KG
​
USE ON TRACK | CRANE TRACK ONLY
​
USE OUTSIDE OF STUDIO | RAPTOR - POSITIONING ONLY
​
MOBILE OPTIONS FOR TRACKING SHOTS | NONE
​
TECH REQUIREMENTS | 1 X CHAPMAN CRANE TECH | 1 X CHAPMAN HEAD TECH (IF USING WITH HEAD)
​
GRIP REQUIREMENTS |1 X NVQ 2 GRIP | 1 X NVQ L3 GRIP
32' HYDRASCOPE
MIN CRANE ARM UNIT WEIGHT 521.6 KG
​
MAX CRANE ARM UNIT WEIGHT 1,228.7 KG
​
MAX CRANE UNIT WEIGHT ARM & BASE 1,828.7 KG
​
BALANCE RATIO 2:1
​
VOLTAGE | 24v DC BATTERY 110v AC TO 24v DC
​
MIN HEIGHT 7FT
​
MIN LENGTH (RETRACTED) 17FT 9IN
​
MAX LENGTH (EXTENDED) 39FT 9IN
​
REAR TO FULCRUM LENGTH 8FT 11IN
​
FLOOR TO PIVOT MIN HEIGHT 5FT 11IN
​
FLOOR TO PIVOT MAX HEIGHT 10FT 6IN
​
UNDERSLUNG LENS HEIGHT* 32FT 6IN
​
OVERSLUNG LENS HEIGHT* 36FT 6IN
​
BASE WIDTH 4FT 10IN​
​
BASE LENGTH 6FT 3IN
​
BASE TYPE ULTRA CS
​
WEIGHT OF BASE 600KG
​
USE ON TRACK CRANE TRACK ONLY
​
USE OUTSIDE OF STUDIO RAPTOR - POSITIONING ONLY
​
MOBILE OPTIONS FOR TRACKING SHOTS NONE
​
TECH REQUIREMENTS 1 X CHAPMAN CRANE TECH | 1 X CHAPMAN HEAD TECH (IF USING WITH HEAD)
​
GRIP REQUIREMENTS 1 X NVQ 2 GRIP | 1 X NVQ L3 GRIP
IMPORTANT NOTICE
​
*LENS HEIGHT DEPENDS ON THE TYPE OF REMOTE HEAD AND CAMERA MOUNTED TO THE CRANE - YOU ARE ADVISED TO GET IN TOUCH IN ADVANCE OF YOUR SHOOT FOR SPECIFIC HEIGHT MEASUREMENTS FOR YOUR CAMERA/HEAD SET UP
**MINISCOPE ARM MAY BE SLID FORWARDS (POSITION 1) OR BACKWARDS (POSITION 2) OVER COLUMN